Concrete Contractor in Bushland, TX
Long driveways, shop slabs, RV pads, and rural residential concrete across Bushland and western Potter County. Poured to hold up to Panhandle weather and heavy loads.
Call (806) 639-4999Get Your Free Quote
Where the Acreage Lots Start
Bushland is where the acreage lots start. Fifteen miles west of central Amarillo along I-40, most Bushland residential is 1-to-5-acre parcels with long driveway runs, workshop buildings, and RV/trailer storage. The concrete work here skews heavier than city residential — thicker slabs, longer driveways, more shop foundations, more RV pads.
Bushland sits in Potter County under Bushland ISD. The soils here are similar to west-of-Loop-335 Amarillo — clay-heavy topsoil over caliche, expansive in wet-dry cycles.
What We Do in Bushland
- Long driveway runs — 100+ foot driveways to set-back houses, proper joint spacing and cross-slope drainage
- RV pads and boat storage slabs — 6″ pours with #4 rebar, 4,000 PSI mix, wider expansion joints for thermal cycling
- Shop and barn slabs — 6″–8″ reinforced pours, interior slabs with vapor barrier, sometimes trench drains for wash-down
- Rural residential patios — often bigger than city patios, oriented for view and wind protection
- Foundations — same post-tension and pier-and-beam options, sized for larger footprint homes
- Ranch and equipment pads — livestock chute pads, feed trough pads, equipment storage foundations
Long-Driveway Considerations
Bushland driveways often run 100–400 feet from the road to the house. This changes the pour math:
- Joint spacing matters more — a 300-foot driveway needs planned control joints every 10–12 feet
- Cross-slope drainage — long driveways need proper crown or single-slope to shed rain
- Rebar orientation — long runs benefit from doweled construction joints so slabs move independently through thermal cycles
- Access for the ready-mix truck — soft ground after rain or narrow gates sometimes call for pump-truck placement
Shop Slabs — the Bushland Specialty
A lot of Bushland residents have shops. Detached garages, hobby workshops, ag-equipment maintenance buildings, welding shops. What matters:
- Thickness: 6″ for lighter shops, 8″ for heavy-equipment maintenance
- Reinforcement: #4 rebar on 12″–18″ centers
- Vapor barrier: 10-mil poly under the entire pour
- Anchor bolts: J-bolts or expansion anchors set in wet concrete for metal-building or wood wall plates
- Slope to drain: 1/8″–1/4″ per foot toward the floor drain if there is one
- Curing: important on interior slabs — wet cure or curing compound, no rushed dry-out
Potter County Permits
Potter County outside city limits has less-stringent building permit requirements than the City of Amarillo, but Bushland ISD occasionally has additional utility easement and drainage rules. We coordinate with the county on OSSF setbacks.
Pricing & Local Context
| Job | Range |
|---|---|
| Long driveway (200 ft × 12 ft) | $12,000–$22,000 |
| Shop slab (24' × 30' × 6″) | $6,500–$11,500 |
| RV pad (12' × 45' × 6″) | $4,200–$7,500 |
| Standard driveway | $2,880–$10,000 same as Amarillo |
I-40 corridor puts Bushland on a natural east-west traffic path. Bushland ISD schools sit on FM-2381 and drive some local commercial/institutional demand. Ready-mix delivery from Amarillo suppliers works fine.
Bushland is 15 miles west of central Amarillo on I-40 — a 20-minute drive. Our crews cover Bushland with no additional truck-time surcharge.
Do you pour long acreage driveways?
Yes — this is a lot of what we do in Bushland.
What's the right slab thickness for my shop?
6″ for light-duty, 8″ for heavy equipment. We'll help you spec.
Can you place anchor bolts for a metal building?
Yes, set in the wet concrete per your building manufacturer's template.
Do you install trench drains in shop slabs?
Yes.
How do you handle a driveway that runs through low spots?
Design the cross-slope and crown, plan control joints, and use expansion joints at grade transitions.